COMPONENTS OF IGETWELL AIR AND WATER OZONE GENERATOR
- High efficiency pump and fan- You get constant, reliable airflow.
- High end stainless steel tubing, connectors, and parts- You get the most healthy ozone output. Over time your ozone unit will not produce unhealthy ozone.
- Bubbler- Machined from a solid block of glass-bonded silica. They have round grain pore structure, low resistance to air flow, uniform porosity and resistance to clogging.
- Biotech Quartz Glass Bulb- No sparking, No arcing. No Cold Corona Discharge. Does not produce producing harmful nitrogen byproducts, we use unique quartz-crystal technology to avoid production of these harmful by-products.
- Silicon tube on bubbler attachment- This part attaches and detaches and is considered to have high compatibility with ozone. You can buy more if you’d like separate tubes of ozonating oil and water.
- Cost of repair after warranty is low. Most of the extra expensive components in this unit can not actually break, so we have figured if there was even an issue with the device past our 1 year warranty, we have worked out worst case scenario for repair and it’s estimated at $100 dollars. This should be a relief, especially for those who have had expensive units in the past that have failed and spent hundreds getting it fixed.
- Durable outer handmade casing is attractive. We went for the opposite of the “aluminum briefcase/ medical/ store-in-the-closet” look. We know from experience things that you tuck away you don’t use like you should.
ALL UNITS ARE NOT CREATED EQUAL
The materials in a unit make it HEALTHY or UNHEALTHY over time. Some are just unhealthy right from the get-go. Many made in China and even the US are not suitable for health applications. Either they are too strong and used solely for commercial applications or they are built cheaply (which translates into unhealthy) and BREAK easily.
Stainless steel 314 is used for all parts, tubing and connectors where the ozone is produced and contained for transportation out of the output connector! This is graded A+ for ozone and UV compatibility, so parts do not break down over time or become a health hazard.
Why not plastic on these parts? Because UV energy absorbed by plastics can excite photons and create free radicals. Ozone is highly oxidizing, which is also very bad for materials that oxidize quickly, like plastics.
Don’t Know That Much About Ozone?
Need a refresher? Watch the video below. It contains the methods of producing ozone (there are 3), misconceptions about concentration levels and misconceptions about how to use ozone.
TERMS OF SERVICE
We cannot make claims about specific products or treatments. While many doctors now offer ozone IV and insufflations (around $150 a treatment) and the trend is going towards high usage for patients, there is a liability issue. You can see my blog post on ozone tips for people who have an at-home unit like myself; however, you must make your own decisions and be responsible for your own health. While we making these units and their output suitable for at-home uses, you still must use your own common sense when running these machines. They are not toys. It is your responsibility to make sure you are using the machine properly. We are not liable for any misuse and by purchasing this unit, that is what you have agreed upon purchasing.
OZONE CONCENTRATION AND FLOW RATE
There are many factors that come into play to figure out this calculation. We tested at 63 Fahrenheit (°F) at 6500 feet. We have 20-25% less oxygen than most people at sea level, so our measurements DOES NOT CONTAIN the 20% increase to adjust to most people’s oxygen levels in ambient air. The levels we have tested for will be 20% LOWER than the levels you will get at sea level!
The factors to consider are TIME (exposure time), flow rate (slower flow rates increase ozone exposure dramatically), altitude, concentration and temperature. Although, experts will tell you even more factors that most people are not aware of. We listed the few major factors to make this information usable for all.
PPM IS UG/ML- it’s the same number. We will use PPM, but the correlation is the exact same number in UG/ML (which is the standard medical units used).
Medical ozone is considered to be anywhere from 1ppm to 90ppm. 90ppm produces BLOOD CURLING or blood crippling in autohemotherapy; therefore, using HIGH amounts of medical ozone is never advised unless you are working with a medical provider.
On the safe side, we consider 1ppm to 50ppm the best for at-home uses and 50ppm is really pushing it.
For those who think they need oxygen tanks, they do not. Ambient air has been used for ozone production in medical applications for a LONG time. Germans have been using ambient air for many of the treatments that can be done at-home; however, autohemotherapy is done with oxygen tanks and rightfully so. This should be done BY professionals only.
Lower ozone concentrations are a good thing as lower concentrations do not produce a huge shock effect that autohemotherapy does. Lower concentrations are highly useful for boosting the immune system. More doesn’t necessarily mean better, this is a very common misconception in the medical ozone world, please see my video to understand more. Our unit produces a medium range in the a short amount of time. So if you want more exposure, you just use it LONGER. Time is the only variable that you will have to manipulate.
These are the tested DIRECT concentration outputs of our unit. The average measurement for each unit is between 20 ppm – 108 ppm.
These are sample taken every 30 seconds of continuous output. We used two units to test and both were calibrated by Aeroqual Limited who manufactures medical ozone testing equipment. The provided us with certificates like the one see in the picture here.
For cleaning air inside a room- 10 x 12 sq foot root will have measurement of .226-.500 ppm in 15 minutes. That is enough to kill many airborne pathogens and clear odors of any sort.
For people who want to use oxygen tanks, this unit does not require one. Direct oxygen would increase our output up to 5 times, making it dangerous. Units that let you set exactly how much and require oxygen are VERY expensive. These are usually sold to medical professionals who spend up to 10k for their units. They are looking to be very precise, because they have too.
You can increase your exposure by just monitoring time. We have made this simple enough. These units provide high outputs. You must use caution and go slow when using them.
The American Acadamy of Ozonetherapy research – https://www.zotero.org/groups/isco3_ozone
How I use at-home ozone is described on my blog page here: http://thetickslayer.com/ozone-treatment-for-lyme-disease/
Videos, like this one, are available online. This one contains some of the best research done about ozone. It’s really amazing information provided by Dr. Rowen-
Currently the treatments available using ozone, either medically (with a doctor) or at-home are:
There are twenty-four methods of administering ozone therapeutically.
- in the ear
- vaginal insufflation
- rectal insufflation
- drinking water
- cupping with a funnel
- external limb bagging
- bladder insufflation
- ozonated bath
- breathing through olive oil
- steam cabinet
- ozonated olive oil massage
- ozonated water enema
- direct intravenous injection
- intra-arterial injection
- direct injection into a tumor
- intracutaneous (blistering)
- uterine insufflation
- subatmospheric bagging
- hyperbaric ozone
- dental use of ozonated water
We have spent a lot of time making a work horse unit, although you could still mistreat it. The bulbs inside are GLASS. Any major dropping will result in a damaged unit. The good news is that we can fix it. Bubblers can be purchased if you need more that fit for this unit and we have a 1 year warranty to cover any major problems. This warranty covers general use, no abuse or misuse. If there is a problem with a part, which is generally the case IF it stops working, the part will just be replaced. We cover the shipping back to you, but you cover the shipping to us. If we find the machine just had a faulty part, we will reimburse you for the shipping to us! Once you get your unit, we have a checklist for you to go through to ensure it was received without damage. Follow it and report quickly (within a few days) if there was an issue.
This unit is not a toy and is not suitable to be used or played with by children. Adult supervisions is required. Do not look directly through the filters to see the UV light for an extended period of time. The box is made of a UV Solar Tint that blocks 98% of UV light, but the filters do not. The unit is heavy, dropping it on a foot would break a toe or your foot. You must use caution and good judgement operating this device. The output contains 03, which is not suitable for direct inhalation. You risk electrical shock if you open the case. If you open the case, your warranty is voided.